Author Archives: Main Street Heating and Cooling

What is Mini-Split AC?

Mini Split Installation by a Qualified HVAC Technician

How Much Does it Cost to Install a Mini Split Air Conditioner?

A ductless mini-split air conditioning system typically costs between $1,300 to $4.500 with an average of $2,000 BTU’s system. A one-ton unit with one outdoor and one indoor component at 21 SEER rating will have a range that vacillates. This range exists between $1,000 to $4,000 depending on the brand and the specific kind of indoor mount. 

Do Mini Splits Heat and Cool?

This is a great question. Mini-splits actually heat and cool. They allow individuals and homeowners to control the temperatures in rooms and spaces. These systems have two main components. These components are an outdoor compressor/condenser, and an indoor air-handling unit, also known as an evaporator. 

Do I Need a Mini Split for Every Room?

If you have installed a mini split system in your home, you may wonder whether or not you will need to install one for every room to ensure proper air temperature. With this in mind, it is important to understand that you won’t need a single indoor unit for every room in the home. The outdoor unit is capable of attaching to multiple indoor wall-mounted units. If you need to add more air conditioning or heating, rather than extend the ductwork, it might be best to simply add a mini-split system in a new guest room or garage apartment. Speaking of hot temperatures, when your air conditioning goes down on a hot day, you need emergency air conditioning repair. Please make sure to contact a reputable HVAC company for all of your heating and cooling services. 

Which Mini Split System is Best?

There are a number of mini split ac systems on the market that are worthy of consideration. One of these systems is made by Senville, and is entitled the SENL-24CD Mini-Split Air Conditioner and Heat Pump. Pioneer air conditioners also come very highly recommended, as do Innova and Klimaire. 

Are Mini Splits Worth the Cost?

Ductless mini split ac installation can seem like a worthwhile investment. But is it worth the cost? According to the US Department of Energy, mini splits typically run around $1,500 to $2,000 per ton (also known as 12,000 Btu per hour) of cooling volume. This means that, when compared to the cost of a central AC system, they can cost approximately thirty percent more. They can also cost twice as much as window units of a similar capability and capacity. Inevitably, this means that receiving a personalized consultation with an HVAC technician is in order when contemplating such an investment. It’s always important to select the most energy-efficient air conditioning/heating system within your budget. 

Can Mini Split Systems Be Run Inside the Walls

When it comes to whether or not a mini-split system can be run inside the walls, between the studs, there are conflicting opinions. The primary reason why this is not done is because if there is any need for repairs, they will be costly because the drywall will need to be removed. Some experts state that is is possible provided the homeowner runs a steel bracket between the lineset and the inner wall. If homeowners move forward with this course of action, they are advised not to hang a picture near the systems where they connect.

What is Mini Split AC

Mini-split systems are known as heating and cooling systems that provide homeowners with the opportunity to control the temperatures in individual rooms or spaces. They have two principal components. These two components are an outdoor compressor/condenser, and an indoor evaporator, or air handling unit. 

Why Use a Mini Split AC?

There are a number of reasons why people invest in mini split ac systems. Please browse through the following bulleted list to find out more!

  • Efficient and easy. Mini-split systems are reputed to be energy efficient in certain circumstances and don’t require complex ductwork. 
  • Complete control. Each room can be kept to customized temperature. This means that when visitors come over, they can control how hot or cold their room is.
  • Remote controlled access to temperature. One of the remarkable parts about advanced mini splits is that they usually come with a remote. With the click of a button, homeowners can control the temperature of the room they are in.
Mini Split AC Installation

How Does Mini Split AC Work?

Mini-split air conditioners work through a two-step process. The indoor unit blows warm air from the home over cold evaporator coils. The refrigerant running through the coils absorbs the heat from the air and brings it to the outside unit. The outside unit facilitates the removal of the heat is pulled from the air. In this way, mini-split ACs work efficiently to cool and remove hot air.

If you think you need repairs for your mini split ac in Salt Lake City and Sandy, UT, call Main Street Heating and Cooling at 801-930-5151 to speak with our staff about making an appointment today!

Why Is My AC Running But Not Cooling?

A Picture of an HVAC Technician Checking AC Refrigerant.

Why Is the Air Conditioner Not Blowing Cold Air?

It can be incredibly frustrating when your air conditioner is blasting but not cold air seems to be blowing out. This can be especially true when you are in peak summer. There are several reasons why your air conditioner might not be blowing cold air, but fortunately, there are ways to remedy these issues. Below are the reasons why your air conditioning system is running but not producing cool air.

  • Air Duct Leaks: If there happens to be a leak in your air duct, then none of the cool air that your AC is producing will flow into the different rooms in your home.
  • Low Refrigerant: The refrigerant is what makes the air coming from the air conditioner cool, so if it’s low then you won’t have enough cool air.
  • Dirty Filter: The air filter is what traps particles floating in the air, so they can get incredibly dirty. They need to be cleaned and changed pretty frequently or they can stifle the airflow.
  • Dirty Condenser: The job of the condenser is to collect or remove heat in the air conditioner. If the condenser becomes dirty, it won’t be able to get rid of the heat, which will make your home hot.

If you are experiencing any of these problems, the best thing you can do is call an HVAC technician for air conditioning repair. With air conditioning repair, your air conditioner will be able to cool your home efficiently again.

Why Do Air Conditioners Stop Working?

We depend a lot on our air conditioners when it starts to get hot outside. They effectively cool down our homes and keep us comfortable and safe from incredibly hot temperatures. However, there will be many times when your air conditioning system just stops working. To ensure your AC unit is always working, it’s important to invest in air conditioning maintenance in order to avoid air conditioning repair service. Sometimes maintenance can fall by the wayside due to busy schedules and life in general, but that doesn’t stop an air conditioner from developing issues. Some of the most common issues for why an air conditioner stops working is that the condenser coil is dirty, the evaporator coil is frozen, there is low refrigerant, the air filter is dirty, there is a clog in the drain line, or there are problems with the thermostat. To prevent these problems from happening, you can call an HVAC technician for AC maintenance. With maintenance, a technician can clean or change air filters, clean coils, drain lines, and make the necessary air conditioning repair when needed.

How Do I Know If My AC Is Broken?

If you are asking yourself the question, “Why is my AC running constantly?” or some other question about why your AC is acting out of the ordinary, it might be because your AC is breaking down or broken. In order to avoid a complete air conditioner breakdown or even air conditioning repair, it’s important to know what signs to look for when you need air conditioning repair service. Some of the most common signs that you need air conditioning repair is when your AC is blowing hot air, your AC isn’t blowing cool air, there are weird noises coming from the air conditioning, strange smells are coming from the air conditioner, there is weak airflow, or your cooling bills are higher than usual.

Air Conditioner Repair Or Replace

Many homeowners who are having problems with their air conditioner might be struggling to decide if they need air conditioning repair or a replacement. Fortunately, an HVAC technician will be able to make that call, but it’s still good to know when a repair or replacement is needed so you can prepare yourself. As a rule of thumb, when an air conditioning unit is over 15 years old, it will need to be replaced. Other times that air conditioning replacement service will be needed over air conditioner repair is if it’s not as efficient as it used to be, air conditioning repair would be too costly, or your energy bills just keep increasing to no avail. If your air conditioner is just having a bit of trouble, then repairs will be better than a complete replacement.

What to Do If AC Is Not Working?

A Picture of a Man Tightening a Fan Shroud On Outside AC Unit.

Air Conditioning Repair and Maintenance

If your air conditioner is acting up, the best thing you can do is call an HVAC company for air conditioning repair for home. A lot of people ask about air conditioning repair cost, but it will really depend on what part of the air conditioner is not working, how extensive the damage is, as well as labor costs. For air conditioning repair in Salt Lake City and Sandy, UT, please call Main Street Heating and Cooling. We are able to offer air conditioning service that is affordable and effective. We recommend to homeowners to get AC maintenance in order to keep their air conditioners in good shape and running as they should. Make an appointment with us today by calling our office at 801-930-5151!

What is an Air Filtration System?

Air conditioner cooling fresh system saving energy with clear blue sky background.

Improve The Air You Breathe!

Benefit from fresh air within your home or business with a whole house air filtration system! The air that you breathe indoors is often more polluted than the air that’s circulating outside due to it being confined and recycled. In order to protect the health of the occupants inside of your property, it’s best to consider some remedies in air purification from natural methods, corrective habits as well as with the implementation of air purifying systems. If you’re considering a whole house air filtering system then consider the different options available with models and improvements made overall with indoor air systems. It may be reccommended to conduct an indoor air quality testing in Norco, LA to see what pollutants and particles run more rampant in your region.

Do whole house air filtration systems work?

A whole house air filtration system or filtration systems are known to work and provide cleaner indoor air quality for the occupants of a property. Tests have been conducted in both businesses, homes and with those who suffer from minor health problems to find that air filters can increase concentration, better sleep, alleviate symptoms of allergies or asthma and more!

What does an air filtration system do?

An air filtration system will prevent air contaminants from entering your property by capturing particles through air filters before they make their way out of the air ducts and into the rooms of your home or business.

How does an air filtration system work?

An air filtration system can come in many different types and models yet they essentially work in similar ways. Essentially, air purifiers use internal fans that pull air into your home and then this air will move through a series of air filters which can range in their abilities to catch such air pollutants and airborne particles such as pollen, bacteria, and dust. This air will then be circulated into the rooms of a property and this process will repeat through the passage of time.

What is the best whole house air filtration system?

Whole house air filtration systems are being made in regularity with improvements to capabilities which can change the ranks on the market yearly. However as of May 2019, what is considered the best HEPA whole house air filtration system is the Alen CUstomizable Air Purifier while the best whole house air filtration system for allergies is Honeywell F100F2010. In general, taking in all of the different types of air purifiers it may be a good idea to consider HEPA filters which do a great job of capturing small particles. HEPA stands for high-efficient particulate arrestance and in order to be classified into this category, air filters must remove no less than 99.97% of particles .3 microns or larger from the air. This standard is given by the Department of Energy which provides credentials in making HEPA air filters a gold standard for airborne and allergen particle removal.

A woman's hand opens a window to ventilate the apartment to let fresh air in the room.

Different Types of Whole House Air Filtration Systems

  • True HEPA/UV-C Air Purifiers
  • True HEPA Air Purifiers
  • HEPPermanent HEPA-Type Air Purifiers
  • A-Type Air Purifiers
  • Activated carbon filters
  • Ionic air purifiers
  • UV purifiers

Whole House Air Filtration System Cost

The cost of a whole house air filtration system can differ based on the classification or model of a unit yet the average amount that Americans spend on installations can range between $587-$2,302. That being said, the cost of the unit itself can range from $1,000 to over $5,000.

How do I filter the air in my house?

There are several ways that you can improve the air quality of your home, take for instance that you employ the use of whole house air filtration system or even add some natural remedies to your space with the implementation of plants. Believe it or not, but there are plants out there that can aid in improving air quality and actively protect against certain harsh chemicals or pollutants.

How can I improve the air quality in my home?

A good way to improve the air quality of your home is to consider your daily habits. There are many VOCs (volatile organic compounds) present in even furniture and paints which can be detrimental to your health. When considering furniture pieces or other indoor decor look into the materials that they’re made up of. As far as ventilation, you can open the window every so often as well as change your air filters every 1-3 months. If you have pets then try to clean more often than regular and make sure areas are maintained and hygienic. As of such, with pets and smoke your air filters are recommended to be switched or cleaned more regularly.

Are whole house air purifiers worth it?

A whole house air filtration system is worth it in the long run for both your health and pocket. They’ll be able to efficiently cut back on HVAC costs due to their filtration methods which will allow for the overall HVAC system to run more smoothly without any blockages. If you’d like to know more about the benefits of a whole house air filtration system reach out to a qualified air conditioning service company for more information!

If you’re in need of a whole house air filtration system in Salt Lake City and Sandy, UT call 801-930-5151 with Main Street Heating and Cooling!

Air Conditioning Myths You Probably Believe

Air Conditioning (1)

We know that people like to have the inside scoop about home air conditioning systems, but don’t believe everything you hear. There’s a lot of misinformation out there. We have compiled this list of some of our favorite Not-Quite-True Air Conditioning stories, in hopes to spread the word about what works (and what doesn’t) when it comes to air conditioning.

Myth #1: Air conditioner filters should be replaced once per year.

Actually, the EPA’s Energy Star program recommends that you change your air filters monthly, or at minimum, every 3 months. Households with pets and people with allergies should be especially careful to replace the filter on a regular basis. Dirty air filters can inhibit air flow and force your A/C to work harder. This wastes energy and may cause the premature death of your air conditioner.

Myth #2: Cranking the thermostat cools the house faster.

Wrong again! Going back to the info found on that handy Energy Star website, your A/C doesn’t work harder just because you lowered the temperature on the thermostat. The thermostat cools and heats the house at a set rate, regardless of the temperature setting.

Myth #3: Ceiling fans keep the house cool.

When moving air touches your body’s perspiration, you experience a pleasant cooling effect. It’s nice for you, but it doesn’t change the temperature of the room. Running the ceiling fan without anyone around is a waste of energy. Actually, the motor in your ceiling fan creates heat, so if you’re run a ceiling fan in an empty room, you may be losing ground.

Myth #4: Turning off your AC while you’re at work saves money and energy.

This myth is actually half true, because turning off the air conditioner while you’re at work does save energy. It also forces your air conditioner to work much harder when it’s finally turned back on. The benefits of turning off the A/C every morning are negated by turning the air back on every evening.

Want to save money while you’re away? Adjust the setting less dramatically in the mornings before you leave. An adjustment to your thermostat of only 5 or 6 degrees allows your your air conditioner to work less hard during the day, while making it easier for the A/C to cool off your house at night.

Myth #5: Closing vents in unused parts of the house will push air where I want it.

Although this may have been true at one time, it’s not anymore. Modern, high performance A/C systems rely on a delicate balance to keep your house sufficiently cool. By closing off parts of the house, you upset the balance and cause your system to work harder in compensation. And don’t forget: A/C systems have a convenient de-humidifying effect. Closing off parts of the house could lead to moisture problems down the road.

If you have additional air conditioning questions, schedule a no-obligation repair service call with the friendly folks at Main Street Heating and Cooling. Call 801-930-5151!

How to Make Your HVAC More Efficient

A New HVAC System Installation

We Can Save Energy at Home!

How can I improve my HVAC efficiency? That’s a question that our technicians hear time and time again, and for good reason. While electronics and other appliances claim a growing portion of our daily energy usage, the US Department of Energy states that almost half of our energy consumption still comes from heating and cooling.

So what happens if we improve our home HVAC energy efficiency? We get huge savings on our utility bills! Today, we’ll talk about how to reduce heating and cooling costs each day. By the end of our discussion, you should be able to craft your own winning energy strategy! Let’s get started.

How to Reduce HVAC Power Consumption

Thanks to modern advancements in HVAC energy efficiency, you’re almost guaranteed to find a heating or cooling system that offers improvements over your current model. While that obviously represents a significant investment, the energy savings are usually worth the cost (especially if you already need a replacement). However, you will need to make sure that your new system’s output matches the demands of your home or business.

Efficiency Ratings

What is a Good Energy Efficiency Rating?

There are three efficiency ratings that consumers should pay attention to: EER, SEER, and HSPF. EER examines the amount of electricity an AC unit consumes and compares that figure with its cooling output. Think of it as a snapshot of your system while it’s working under difficult conditions. Some of the most highly rated HVAC products fall between 12 – 14 EER ratings.

SEER measures the same figures, albeit under more favorable temperatures over an entire season. Government required minimums start at 13 or 14, but scores may go as high as 25. While any score within that range offers capable efficiency, many homeowners aim for a score between 20 – 21.

HSPF, or heating seasonal performance factor, is basically the same as SEER, but for heating systems. It examines heating performance over an entire season. Aim for a score between 9.5 – 12.

Great Solutions

What is the Most Efficient HVAC System?

Heat pumps (especially geothermal) are widely regarded as one of the most cost-effective energy efficient HVAC systems available on the market. For homeowners that prefer a room-by-room heating and cooling setup, mini split systems offer a great alternative. Just make sure you get the ductless variety so you can avoid potential leak problems. offers a very strong list of efficient HVAC products. If you’re searching for well-rated brands, they highly recommend Amana, Armstrong, and AirEase.

Replacement Costs

How Much Does it Cost to Replace an HVAC System?

If you choose to replace both your heating system (furnace, boiler, etc.) and your air conditioning at the same time, you can expect to pay up to $15,000. Your cost will depend on your city, state, product choice, brand, and ductwork requirements.

Does HVAC Maintenance Save Energy?

While upgrading to a newer, more efficient HVAC model is nice, not every homeowner has the budget or need to replace their system. In fact, there are numerous ways to save that don’t require making a large purchase. Maintenance and usage habits make a greater impact on your energy consumption than you realize!

Leave it On?

Is it More Efficient to Leave Air Conditioning On?

While some would try to complicate the issue, the answer comes down to simple math. More run time, even in the most advanced air conditioning systems, equals more time where energy is consumed. Air conditioning systems may reach peak efficiency at maximum output, but that doesn’t mean you should always keep your system turned on.

Reducing Costs

How Can I Reduce Heating and Cooling Costs?

There are plenty of opportunities to enhance your HVAC energy efficiency in your current heating and cooling systems! First, consider installing an ECM motor for your AC blower. Most traditional HVAC motors utilize simple on-or-off settings, which wastes energy every time you turn on the air conditioning. ECM motors provide variable speed settings, allowing a gradual build up of power until your system achieves the desired temperature.

Nest thermostats also offer fantastic ways to save by cutting out wasted run times. These intuitive products learn your heating and cooling usage patterns. With this information, a Nest thermostat can turn off your system during work hours and reduce power during sleeping hours.

Of course, regular maintenance also supplies easy savings through reducing waste caused by leaky ducts, obstructed airways, and failing parts. Homeowners can complete many of these simple tasks (seen below), and the energy savings are worth the effort!

Ways to Reduce HVAC Power Consumption

  • Regularly replace your furnace and AC unit filters.
  • Keep your condenser and evaporator coils clean.
  • Clean out your air ducts (or have a professional do it).
  • Ensure your air ducts are properly sealed.
  • Install a variable speed ECM motor for your HVAC blower.
  • Install a Nest thermostat to reduce energy waste during away times.
HVAC Tech Finishes With Mini Split System

Find Your Energy-Saving Options!

Want more information about enhancing your home’s utility savings? Our team at Main Street Heating and Cooling would love to talk with you about HVAC energy efficiency in Salt Lake City and Sandy, UT. Consult with one of our friendly, knowledgeable HVAC technicians at 801-930-5151!

Sounds and Smells: What Your Furnace is Trying to Tell You

What Your Furnace

There are a few different common signs owners should be aware of when they want to test out a furnace for themselves. Owners should contact a repair team if they feel like major issues are coming up with their unit. Understanding these common signs could be the first step that owners will need to complete. They should think about the unique aspects of how these systems may be used as well. This could help owners understand whether their furnace is operating less efficiently than it should over time. Main Street Heating & Cooling can lend their support for a few major projects owners may need to complete.

Burning Smells

First, owners may find that their furnace is emitting a burning smell at times throughout the year. Often times, they will smell an intense burning when they first turn on the furnace at the start of the winter season. This could be the furnace burning off dust particles that have accumulated within the different types of components within the unit itself. But there are also times when different types of components may inadvertently be burning within the unit. If the burning smell tends to persist, then this could be a sign that owners should do something to make a major furnace repair soon.

Other Smells

If there are other smells emerging from the furnace, then this may be a sign that the filter needs to be changed. It will be important to change out the filter from time to time as well, since this can keep the furnace operating throughout the year. Every owner will need to think about using the right techniques to keep the furnace operating as it should over time. They should follow factory directions to make sure that the unit is being properly utilized for a few different types of settings.

Gas Smells

A gas smell may actually be a major warning sign for many owners out on the market. This is especially true if they tend to use a gas furnace that will contain a few different types of connections. Many of these connections can wear down or become broken over time as well. If this happens, it will be important for people to quickly find a new replacement to put in to place. They should work with a repair team that will be able to fit new components in to place. Most owners will appreciate the opportunity to replace these elements over time as well.

Loud Noises

Finally, most owners will want to check out how they can watch for sounds emerging from their furnace design. Major sounds could be an indication of mechanical problems, so people will need to work with a repair team soon. They can quickly diagnose the problem, which will be an important issue that people should consider. This will be a worthwhile asset that owners should consider, since they need to keep their systems well maintained over time.

Ideal Furnace Locations When Building a New Home in Utah

Ideal Furnace Locations

Your furnace is an essential component in your home’s central heating system. The furnace provides warm air for your family during cold season. For this reason, you should clearly understand its mechanisms as well as its ideal location in your house.

How Does a Furnace Work?

All heating systems have three essential parts – the heating source, heat distribution system, and the control system. These individual components perform a unique function in order to function properly.

A furnace is an example of a heating source that is responsible for generating heat inside your home. On the other hand, the heating distribution system supplies and disseminates warm air through various parts of your house. To manage the amount of heat, a control system such as a thermostat is always needed.

Three Crucial Factors

Furnace Location Custom Graphic

Before installing a heating system in your new home, you may want to consider the following factors first to avoid costly mistakes.

  • Size

One of the most important factors to remember is the operational cost of your furnace. Always make sure the size of your furnace is appropriate for your new home. If you cannot find the right size, you may want to consult a professional HVAC specialist.

  • Efficiency

The Federal Trade Commission (FTC) now expects new heating systems to “display the annual fuel utilization efficiency” (AFUE). This requirement is an initiative to help consumers like you to understand the heating efficiency of a particular product. This information will surely help you effectively make a comparative study between two products.

  • Fuel

Your current location dictates the type of fuel you need for your heating system. In general, heating systems use propane, natural gas, electricity, and heating oil. Your personal preference matters as well but most of the time, the most abundant fuel type available in your location is highly recommended.

Ideal Locations to Install Your Furnace

Furnace installation usually requires assistance from a licensed and insured HVAC technicians. The following locations are simply recommendations. Air leaks are common when it comes to furnace installation that is the reason why you should always consult an HVAC specialist for your own safety and convenience.

You can choose to install your furnace either in an unconfined or a confined space. At the same time, this also depends on the type of furnace you choose to install. Here are a few suggestions.

  • Basement

If you prefer a gas or electric furnace, you may want to install the furnace in your basement. One major advantage is that you will have an easy access to your unit in case it needs repair. Just make sure the unit is at least four inches off the floor. This allowance will help you protect the furnace from moist and heat issues.

  • Attic

Ideally, your furnace should be installed in a secluded area where you will not be disturbed by its noise. If your furnace is installed in your attic, ask an HVAC specialist if you need to a more durable drainage pan system.

  • Garage

Your garage is also an ideal location for your furnace especially if you do not have ample living space. Make sure you create a good drainage system that will channel all excess moist from your furnace.

To keep your furnace in good condition, you should make sure you have an easy access for regular maintenance. The unit must be totally free from any items that will obstruct the airflow.

A high quality furnace can keep your family snug and warm during a chilly season. Consider the services of an HVAC technician who can assist you in choosing and installing the best furnace in your new home.

What Happens to Old A/C Systems When They’re Replaced?


With summer quickly approaching, an air conditioning system in both the car and the home that works properly is essential to staying comfortable and cool. When the sun’s beating down, there’s no better escape than a relaxing and well air conditioned area in which you can lounge in. If you’re curious about the differences between your car and home air conditioning systems, or if you need services to get your air conditioner in tip-top shape for the hot summer months, read on:

How Does a Home Air Conditioning System Work?

A home air conditioner works very similarly to a refrigerator. Essentially, an air conditioner uses refrigeration to cool the air that is already inside your home. The air conditioner does this using chemical compounds called refrigerants in a process known as phase conversion. Within the air conditioning system, there is also a fan that moves the air. The fan moves the air through multiple duct systems where the air passes over coils that contain refrigerants. Once the air has been cooled, the cooled gas is once again converted to a liquid using high amounts of pressure. Then, the process repeats itself. The air is then distributed back to the home, cooling the room that it enters into. This airflow and evaporation is usually powered by an electric motor.

Maintaining your air conditioner is an important part of making sure that it functions as it should and cools your house to the best of its ability. Performing an annual air conditioner maintenance check can help you to lower your energy bills, lower future repair costs, extend the life of your air conditioner, and provide you with peace of mind and a cool home.

How Does a Car Air Conditioning System Work?

A car’s air conditioning system works very similarly to that of a home’s air conditioning unit, only on a much smaller scale. Rather than an electric motor powering the air conditioning unit, as is the case in a house, the air conditioner is powered by the vehicle’s engine, resulting in mechanical compression. Essentially, the parts and the process are the same, while the size of units and the form of power are different. Gas from your vehicle powers your car’s air conditioning system.

Like a home air conditioning system, though, making sure your car’s air conditioner is well maintained will help to keep you cool and save gas during the hottest parts of summer.

Keeping Cool in the Summer Months

Ensuring that your car and home air conditioning units are functioning properly this summer will help you stay cool. An air conditioned home improves its quality, and makes it more enjoyable for relaxing, entertaining guests, or working around the house. Additionally, a well-maintained air conditioning system will operate more efficiently, saving you money on your monthly power bill.

Check Out Our Guide on How to Summertime Savings on Air Conditioning & Cooling Systems!

If you’re in need of central air conditioning repairs, hybrid system repairs, thermostat installation, installation or repair of your cooling system, an air conditioner inspection, or anything else related to your cooling needs, make sure you call the professionals at Main Street Heating & Cooling today.

How to Reduce Your Office’s Energy Bill

How to Reduce Your Offices Energy Bill

Companies are always looking at ways to increase profits and reduce costs. One major cost that many businesses face is the energy cost associated with running the office. By focusing on saving energy, a business can reduce its office energy bill. Some key ways to save energy in the office include turning off computers and lights in the office at the end of the work day, having the office air conditioning and heating system maintained and tuned-up on a regular basis, and trading in older office equipment for newer, more energy-efficient equipment.

Here are several tips for reducing your office’s energy bill.

1. Replace aging office equipment.
It is not uncommon for aging computers, copiers, and printers to use anywhere from 50% – 90% more energy than newer more energy-efficient models. Much of the newer office equipment available today will include an “Energy Star” logo, which signifies that the equipment bearing the logo is specifically designed to save energy and reduce cost. A general rule of thumb is to use laptops instead of desktops or ink-jet printers instead of laser printers.

2. Power down at the end of the work day.
Even if your computer is in an idle state, it still uses power. The easiest way to help employees power down their equipment at the end of the work day is to connect all of the electrical devices at a workstation into a single power strip. Employees can then simply turn off the power strip at the end of the day and sever their workstation from using any power unnecessarily. Of course, employees should still properly power down any devices that require it, before turning off the power strip.

3. Make good use of natural light.
Many offices have the ability to let in copious amounts of sunlight. Using natural light can allow for overhead lights to be turned off for the majority of the work day.

4. Make sure doors and windows are properly sealed.
Weather stripping around all doors and windows will prevent energy from escaping the office, when either the heater or the air conditioner is running.

5. Have the office HVAC (heating, venting, and air conditioning) system cleaned and maintained on a regular basis.
A properly functioning and clean HVAC system will contribute to reducing your office energy bills in a major way. The dirtier and less-efficient an HVAC system is, the harder it has to work to heat or cool an office. An HVAC system needs to have evaporators, coils, heat exchanger surfaces, and condensers cleaned every month. The air filters should also be replaced monthly. Most businesses hire a heating and cooling company to handle the upkeep of the HVAC system.

6. Set the office temperature based on work patterns.
The thermostat does not need to maintain an ideal office temperature during non-working days and hours. At night and on weekends, the thermostat can be raised in warm weather and lowered in cold weather. The recommended temperatures are above 80 degrees in the summer and below 65 degrees in the winter. While you wouldn’t want to maintain these temperatures during work hours, there is no reason to maintain perfect working temperatures, when no one is working.

HVAC Glossary


Seasonal Energy Efficiency Ratio –each air conditioner and heat pump receives a SEER rating, ranging from 13 to 20.  The higher the rating, the more energy efficient the HVAC unit operates.

Evaporative Cooler

The part of an air conditioner or heat pump that absorbs heat.  In an air conditioner, the heat is pushed outside.  In a heat pump, the heat is used to heat the home.


Air flows through this type of system so that it can be distributed through a home.


The amount of water vapor that is in the air.


British Thermal Unit –one BTU equals one unit of heat energy.  It takes one BTU to raise one pound of water one degree.  When a heating unit has a high BTU, this means it has a high heating capacity.

Carbon Monoxide

When carbon burns in a home without sufficient amounts of air, an odorless and poisonous gas known as carbon monoxide will be released.


This is the part of an HVAC unit that pumps refrigerant so that cooling requirements can be met and maintained.


Part of an air conditioning unit that gets rid of heat.


This part of an air conditioning unit captures heat and removes it from the part of the unit that needs to be cooled.


A device used in homes to put out heat.  It can come as a single unit or be combined with an air conditioning unit, commonly referred to as a central heating and cooling unit.

Geothermal heat pump

A type of central heating and cooling unit that takes heat from the ground and uses it to heat a home.


Heating, Ventilation, and Air Conditioning –a unit used in a home to heat and cool the inside.


Basic SI unit of energy.

Latent Heat

This heat is required to transform a liquid into a vapor or vice versa without changing the actual temperature.

MERV Rating

Minimum Efficiency Reporting Value –Filters have MERV ratings, which describes how big the holes are in the filters.  A higher MERV rating means the smaller the holes, which translates into higher efficiency.


A liquid/chemical that’s used in cooling units; this chemical gives off a cooling effect, and it is commonly referred to as Freon.

Split System

When a home has a HVAC unit that has components located both inside and outside of the home, this is known as a split system.

Sensible Heat

When a substance is heated and the temperature itself rises; unlike latent heat where the state of substance changes but the temperature does not.

Static Pressure

The amount of pressure that is exerted on the duct system, but it’s not the pressure coming from any moving air.


A unit of measurement that is used to identify the cooling capacity of an air conditioning unit.


Part of the HVAC system that ventilates the home.


The amount of energy that an HVAC uses.  The higher the wattage, the more energy the unit is using.


This is a method used in homes when different rooms require different comfort zones.  Zoning provides enhanced heating and cooling, which translates into optimal comfort and efficiency.

At Main Street Heating and Cooling, it is our privilege to partner with you. Committed to exceeding your expectation, our HVAC technicians delivercustomizable solutions that are affordable and energy efficient. Contact Main Street Heating and Cooling for a no-obligation, completely free evaluation, and we gaurantee your satisfaction.